Self-test for fire extinguishing system - AR86.10-P-0101-01MB
- Switch on ignition and turn ignition key to position "2".
Activation button (2) and triggering button (1) in fire extinguishing system manual activation switch (S62/23) illuminate for 10 seconds and then go out.
If activation button (2) and triggering button (1) are no longer illuminated and the warning buzzer does not sound, the fire extinguishing system is ready for function
If the warning buzzer sounds and the activation button (2) and triggering button (1) continue to illuminate, the fire extinguishing system is not ready for function
- Switch off ignition.