Removing and installing ring cylinder - AR35.41-P-0545-02C
Coat ring cylinder on periphery of O-ring with hydraulic fluid: ↓
Hydraulic fluids
| Number | Designation | Model 124 | Model 129 | Model 201 | Model 202 | |
|---|---|---|---|---|---|---|
| BA35.41-P-1001-01A | Bolt to ring cylinder | Nm | 25 | 25 | 25 | 25 |
Removal
- Unscrew hexagon socket bolts (27a) and remove ring cylinder (70)
Installation
- Smear ring cylinder on periphery of O-ring with hydraulic fluid (specification 343.0) and insert in rear axle center assembly.
Do not damage O-ring when installing (arrow).
- Screw in hexagon socket bolts (27a), observe tightening torque.