Installing left circlip - AR35.31-P-0550-27C

Fig 1: Identifying Drift (126 589 00 15 00)

COMMERCIALLY AVAILABLE TOOLS

Number	Designation
WH58.30-Z-1009-02A	Pliers for circlip, inner

Install circlip (29)previously removed and marked into groove using pliers (064) such that opening of circlip (29) faces rib (arrow).
Install circlip (29)which was removed and marked previously in order to achieve a basic preload of the rear axle housing.

Fig 2: Installing Circlip
Use drift (048) to check that circlip (029) is correctly seated.

Fig 3: Identifying Tapered Roller Bearing, Differential, Circlip And Rear Axle Housing