Remove/install top charge air distributor - AR09.41-P-1320GX

ENGINE 113.993 in MODELS 463.270 /271 

Fig 1: Identifying Air Filter Housing, Hose Clamp, Top Part Of Charge Air Distributor And Bolt

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove air filter housing (1).		AR09.10-P-1150GX
2	Open the hose clamps (2)	at both the top parts of the charge air distributor (3).
3	Unscrew bolts (4) at the top parts of the charge air distributor (3)		*BA09.41-P-1001-01C
4	Lift off the top parts of the charge air distributor (3)	Installation:  Replace the gaskets.
5	Install in the reverse order

CHARGE AIR PIPE/CHARGE AIR COOLING

Number	Designation		Engine 113.992/993/995
BA09.41-P-1001-01C	Bolt of upper part of charge air distributor to bottom part of charge air distributor	Nm	10