Pull out instrument cluster - AR54.30-P-6015-01P

WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Pulling Hooks (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA

Do not damage the dashboard when removing.

Insert pulling hooks into slots (1) in instrument cluster (A1) with the bend pointing to the right.

Fig 2: Identifying Instrument Cluster And Slots
Courtesy of MERCEDES-BENZ USA

To prevent the pulling hooks from slipping out of the guide duct (2), they must be pressed gently outwards (in direction of arrow).

Fig 3: Pressing Pulling Hooks Outwards
Courtesy of MERCEDES-BENZ USA
Carefully insert pulling hooks as far as the stop (approx. 80 mm) and unlock catch (3).
Turn pulling hook 90° in clockwise direction (elbow is pointing down).

Fig 4: Identifying Catch And Guide Duct
Courtesy of MERCEDES-BENZ USA
Carefully pull out instrument cluster (A1).

Fig 5: Identifying Instrument Cluster
Courtesy of MERCEDES-BENZ USA