Programming of control units - AR54.21-P-0014Y

WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 209 Offline programming with Release CD

		During the entire work procedure a sufficiently large voltage supply must be provided for the vehicle's on-board electrical system. Otherwise undervoltage damage may occur to the control units.
	Notes on programming control units		AH54.21-P-0001-03Y
1	Connect STAR DIAGNOSIS and start Diagnosis Assistance System (DAS) Connect STAR DIAGNOSIS and read out fault memory	Model 209	AD00.00-P-2000-04A
2	Program control unit		AR54.21-P-0014-01Y
3	Perform software calibration number (SCN) coding for control units	Only when required, refer to DAS.	AR54.21-P-0015X
4	Run teach-in procedures	Only when required, refer to DAS.
5	Read out and erase fault memory
6	Disconnect STAR DIAGNOSIS