Rear SAM control module with fuse and relay module, task - GF54.21-P-4112-01Q
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
General
General
The rear SAM control module with fuse and relay module (N10/2) is connected to the CAN class B (interior bus).
It detects sensor signals, fill levels and switch status and passes on this information via CAN class B. Furthermore, semiconductor switches which are located in the rear SAM control module with fuse and relay module (N10/2) and relays of the fuse and relay blocks are actuated.
Tasks
Reads in:
- Sensor signals
- fill level sensors
- switches
- information via CAN messages
Switching of:
- consumers via semiconductor switches
Actuation of:
- Relay
Transmission of:
- information via CAN messages
The following functions are realized by the rear SAM control module with fuse and relay module (N10/2) separately or in parallel:
- vehicle rear exterior lights,
- trunk lighting,
- crash opening,
- heated rear window,
- fuel gauge,
- central locking (trunk lid, filler cap),
- ATA control (master function) (with code (551a) anti-theft alarm system (ATA)),
- rear roller blind (with code (540a) electrical roller blind for rear window).