Remove/install outside temperature indicator sensor - AR54.30-P-6341Q
MODEL 209
Shown on model 209.3
MODIFICATION NOTES
| 20.1.04 | Disconnect/connect/remove ground lead from battery |
| Remove/install | |||
|---|---|---|---|
| 1 | Remove front fender liner from front fender | AR88.10-P-1300P | |
| 2 | Unclip outside temperature indicator temperature sensor (B14) | ||
| 3 | Disconnect electrical connector from temperature sensor for outside temperature indicator (B14) and remove temperature sensor for outside temperature indicator (B14) | ||
| 4 | Install in the reverse order | ||
| 5 | Perform function check |