Remove/install transmitter/receiver - AR82.70-P-8911QA

MODEL 209.4 with CODE (853) MB standard telephone with CODE (854) MB portable CTEL

Fig 1: Identifying Transmitter/Receiver Components - Model 209.4

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

MODIFICATION NOTES

24.5.06

"Disconnect/connect ground line on battery" removed

	Remove/install
1	Remove retractable trunk partition		AR68.50-P-3000QA
2	Remove coverings in trunk	Only paneling for left/right soft-top compartment and rear wall paneling	AR68.30-P-4600QA
3	Remove back installation panel		AR68.74-P-1000QA
4	Release and remove D2B telephone transmitter / receiver (A35/13)	Do not bend or stretch fiber optic cable D2B, in order to avoid any signal interruption.
5	Disconnect fiber optic cable connector	Do not kink or stretch the D2B fiber optic cable. Install caps on fiber optic cable connector and equipment connector. Refer to: ↓
		Cover fiber optic cable	AR82.95-P-0005-01A
	Notes on fiber optic cable	Model 129, 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 414, 463.243/ 244/245/246/247/248/249/250/254/ 309/322/323/332/333	AH82.70-P-0001-02A
6	Release coupling and detach
7	Remove D2B telephone transmitter/receiver (A35/13)
8	Install in the reverse order