Wiring diagram for Weight Sensing System (WSS) control unit - PE91.60-P-2102FAA
WARNING: This page is about a different car, the 2012 Mercedes-Benz C300, 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 204.0 up to 28.2.11, 204.9 up to 31.5.11 with CODE (494) USA version Control unit N110
MODEL 204.3 with CODE (494) USA version Control unit N110
MODEL 204.0 as of 1.3.11, 204.9 as of 1.6.11 with CODE (494) USA version Control unit N2/13
| Wiring diagram for Weight Sensing System (WSS) control unit | PE91.60-P-2102-97FAA | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | |
| Use of wiring diagrams | OV00.01-P-1901-03FAA | |
| Search aid for all wiring diagram groups | OV00.01-P-1901FAA | |
| Search aid for all electrical components | OV00.01-P-1909FAA | |
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28FAA | |
| Location and assignment of line and plug connectors | GF00.19-P-1000FAA | |
| Location and assignment of ground points | GF00.19-P-2000FAA | |
| Location and assignment of Z connector sleeves (line connectors in wiring harness) | GF00.19-P-3000FAA | |
| Overview of wiring diagrams covering multiple function groups | PE00.19-P-1100FAA | |
| Fuse and relay box, as-built configuration | MODEL 204.0 /2 up to model year 08/YoM 07 | GF54.15-P-0800CW |
| Fuse and relay box, as-built configuration | MODEL 204.0 /2 as of model year 2009 /YoM 08 MODEL 204.3 MODEL 204.9 |
GF54.15-P-0800CE |
| Repair wiring harness as per specified repair method | The original wire color is visible again after the repair line (length about 30 cm). |
AR00.19-P-0001A |