Hydraulic unit, checking hydraulic system, vario roof (VR) - AD77.50-P-7000-01A

	Scope of test	Measuring instrument/ test connection	Operation/requirement	Specified value	Possible cause/remedy
1.0	Checking hydraulic unit &.3.1.( AD77.50-P-2000-11A )		Support vario roof between catch and mounting with stopper 170 589 00 61 00		Check emergency operation valve (item N)
			AD77.50-P-2000-18A		Tightening torque approx. 3 Nm
			Starting position: Vario roof resting on front catches, trunk lid pivoted to rear		< 180 bar  ↓ Replace hydraulic unit Specified value OK  ↓ AD77.50-P-7000-02A
			Ignition: on  Actuate roof switch for 5 s  (close) Read off test pressure while switch actuated
				180-200 bar