Removing and installing transmitter/receiver unit - AR82.70-P-8911GG

MODEL 170 as of 1.7.00 with CODE (853) MB standard cellular telephone 

Fig 1: Identifying Transmitter/Receiver Unit Remove/Install Components

	Removal, installation
1	Connect quiescent current retention unit		*WH58.30-Z-1012-09A
	Risk of explosion  from explosive gas. Risk of poisoning and caustic burns  from swallowing battery electrolyte. Risk of injury  from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead acid batteries.	No fire, sparks, naked flames or smoking. Wear acid-protective gloves, clothing and eye protection. Pour battery electrolyte only into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
2	Disconnect ground cable of battery		AR54.10-P-0003A
	Notes on battery	All models.	AH54.10-P-0001-01A
3	Remove side cover on left side of trunk		AR68.30-P-4800G
4	Remove antenna splitter in left wheelhouse
5	Unscrew nut (2)
6	Carefully lift cradle (1) with control modules out of spare wheel recess	Do not damage connection lines. Do not kink or stretch D2B fiber optic cable
7	Release connectors on D2B telephone transmitter/receiver (A35/13) and disconnect
8	Loosen sheet metal screws (3)
9	Pull out D2B telephone transmitter/receiver (A35/13)
10	Install in the reverse order