Removing and installing cellular telephone interface - AR82.70-P-7379D

MODEL 170 up to 30.6.00 with CODE (316) MB GSM cellular telephone (D2B) 

MODEL 170 up to 30.6.00 with CODE (317) GSM cellular telephone (D2B) 

Illustrated with permanently installed telephone, code 316 

Fig 1: Identifying Cellular Telephone Interface Remove/Install Components - Illustrated With Permanently Telephone, Code 316

Illustrated with cellular telephone, code 317 

Fig 2: Identifying Cellular Telephone Interface Remove/Install Components - Illustrated With Cellular Telephone, Code 317

	Removal, installation
1	Connect quiescent current retention unit		*WH58.30-Z-1012-09A
2	Disconnect ground cable of battery		AR54.10-P-0003A
3	Remove side cover on left side of trunk		AR68.30-P-4800G
4	Remove antenna splitter in left wheelhouse
5	Unscrew nut (2)
6	Carefully lift cradle (1) with control modules out of spare wheel recess	Do not damage connection lines.
7	Release coupling on control module and remove	Do not kink or stretch D2B fiber optic cable
8	Disconnect antenna cable from transmitter/ receiver (A35)	Only for permanently installed telephone (code 316).
9	Loosen sheet metal screw (5)
10	Remove telephone interface (A34/4)
11	Install in the reverse order