Removing and installing CL element in center oddments tray - AR80.20-P-3650G

MODEL 170 as of 1.6.98 

Fig 1: Identifying CL Element In Center Oddments Tray Remove/Install Components

	Removal, installation
1	Remove rear center console	Disconnect pneumatic line in rear area	AR68.20-P-2020G
2	Remove guide (1) for parking brake lever	Fastened with 4 screws, to remove the guide unhook the transfer lever (5) from the lock section (arrow).
3	Drive pneumatic line (2) off of CL element in center oddments tray (3)	Use 7 mm open-end wrench
4	Remove retaining clip (4)
5	Unclip CL element in center oddments tray (3) from transfer lever (5) and remove
6	Install in opposite order