Testing and repair work: Passenger cars: Suspension - AR32.00-Z-9129AA
MODEL 129
| Removing and installing front spring | MODEL 129 | AR32.20-P-0200A | |
| Removing and installing rear spring | MODEL 129, 140, 170, 202, 208, 210 | AR32.20-P-0230A | |
| Removing and installing torsion bar on front axle | MODEL 129 | AR32.20-P-0300A | |
| Removing and installing torsion bar on rear axle | MODEL 129 | AR32.20-P-0315A | |
| Removing and installing front shock absorber strut | MODEL 129 | AR32.25-P-0100A | |
| Remove/install rear shock absorber | MODEL 129, 140, 170, 202, 203, 208, 209.3/4, 210 | AR32.25-P-0110A | |
| Checking shock absorber strut | MODEL 129 | AR32.25-P-0120A | |
| Checking shock absorber | MODEL 129, 140, 163, 164, 168, 170, 202, 203, 208, 209, 210, 211, 230, 251, 414... | AR32.25-P-0121A | |
| Checking level control pressure oil pump | MODEL 129 with CODE (216c) Adaptive damping system (ADS II) with electronic level control | AR32.31-P-0510A | |
| Removing and installing front axle spring strut | MODEL 129 with CODE (216c) adaptive damping system (ADS II) with electronic level control | AR32.31-P-0605A | |
| Remove/install rear axle suspension strut | MODEL 129 with CODE (216c) Adaptive damping system (ADS II) with electronic level control | AR32.31-P-0610A | |
| Removing and installing rear axle spring actuator | MODEL 129 with CODE (216c) Adaptive damping system (ADS II) with electronic level control | AR32.31-P-0615A | |
| Removing and installing rear axle spring actuator | MODEL 129 with CODE (216c) Adaptive damping system (ADS II) with electronic level control | AR32.31-P-0620A | |
| Draining and filling pressure oil system at front and rear axle | MODEL 129 with CODE (216c) adaptive damping system (ADS II) with electronic level control | AR32.31-P-0630A | |
| Removing and installing level control valve unit | MODEL 129 with CODE (216c) Adaptive damping system (ADS II) with electronic level control | AR32.31-P-0650A | |
| Removing and installing rear axle damper valve | MODEL 129 with CODE (216c) Adaptive damping system (ADS II) with electronic level control | AR32.31-P-0680A | |
| Removing and installing front axle damper valves | MODEL 129 with CODE (216c) Adaptive damping system (ADS II) with electronic level control | AR32.31-P-0685A | |
| Removing, installing ADS control unit | MODEL 129 as of 1.9.95 | AR32.32-P-0500A | |
| Replace (ADS) suspension control unit and adapt vehicle electrical system to control unit version | MODEL 129 | AR32.32-P-0501SL | |
| Remove/install of wiring harness for adaptive damping system (ADS) | MODEL 129 | AR32.32-P-0505SL | |
| Remove/install comfort/sport switch | MODEL 129 | AR32.32-P-0517SL |