Battery, Fuse/Relay Box, Modules, Sensors & Switches -- Testing & Repair -- 215 & 220 Chassis
- Testing & Repair
- Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9215AA
- Testing and repair work: Passenger cars: Electrical system, equipment and instruments - AR54.00-Z-9220AA
- Disconnecting and connecting ground cable at battery - AR54.10-P-0003I
- Removing and installing battery - AR54.10-P-0005I
- Treatment of battery if vehicle taken out of service - AR54.10-P-0006I
- Check quiescent current consumption - AR54.10-P-1030I
- Notes
- Preparing test with quiescent current retention unit - AR54.10-P-1030-01I
- Prepare test without quiescent current retention unit - AR54.10-P-1030-02I
- Check quiescent current - AR54.10-P-1030-03I
- Determine circuit with excessive quiescent current consumption - AR54.10-P-1030-04I
- Establish fused components with excessive quiescent current consumption - AR54.10-P-1030-05I
- Establishing unfused components with excessive quiescent current consumption - AR54.10-P-1030-06I
- Connecting and disconnecting quiescent current retention unit - AR54.10-P-1030-07I
- Check condition of battery - AR54.10-P-1129I
- Charge battery - AR54.10-P-1130I
- Check battery condition before vehicle delivery - AR54.10-P-1132A
- Check charge state of battery - AR54.10-P-1136-01A
- Removing and installing fuse and relay box in engine compartment, left front - AR54.15-P-1257I
- Removing and installing fuse and relay box in engine compartment at right front - AR54.15-P-1258I
- Install headliner wiring harness - AR54.18-P-0020
- Install cable harness - AR54.18-P-0056M
- Repairing wiring harness - AR54.18-P-0100
- Repair supplemental restraint system (SRS) squib wiring harness - AR54.18-P-0600A
- Removing and installing Distronic control module - AR54.21-P-0005I
- Flashing control unit - AR54.21-P-0012-06A
- SCN coding - AR54.21-P-0013
- Programming of control units - AR54.21-P-0014
- SCN coding of control units - AR54.21-P-0015X
- Removing and installing traction system control module - AR54.21-P-0816I
- Removing and installing SAM control module with fuse and relay box in rear - AR54.21-P-1259I
- Removing and installing SAM control module with fuse and relay box, front left/right - AR54.21-P-1260
- Removing, installing control module of upper control panel - AR54.21-P-1262
- Remove/install combination switch - AR54.25-P-2800I
- Remove/install steering column module - AR54.25-P-2802I
- Remove/install cruise control switch - AR54.25-P-2803I
- Removing and installing steering column adjustment switch - AR54.25-P-2804I
- Remove/install light module - AR54.25-P-3260
- Perform adjustments to the control system - AR54.30-P-1000
- Removing and installing instrument cluster - AR54.30-P-6015I
- Removing and installing bulbs of instrument cluster - AR54.30-P-6049I
- Remove/install outside temperature indicator sensor - AR54.30-P-6341
- Removing and installing fanfare horns/claxon - AR54.35-P-1555
- Remove/install Parktronic system (PTS) sensors in front bumper - AR54.65-P-0001I
- Remove/install Parktronic system (PTS) sensors in rear bumper - AR54.65-P-0002I
- Removing and installing Parktronic system (PTS) warning indicator on instrument panel - AR54.65-P-0003B
- Removing and installing Parktronic system (PTS) warning indicator in rear dome lamp - AR54.65-P-0004B
- Removing and installing Parktronic system (PTS) switch - AR54.65-P-0005
- Removing and installing Parktronic system (PTS) control module - AR54.65-P-0006I
- Remove/install sensor - AR54.70-P-0001I