Removing and installing rear center safety belt - AR91.40-P-0683PC
MODEL 203.0 except CODE (287a) Through-loading feature
Fig 1: Identifying Rear Center Safety Belt Remove/Install Components - Model 203.0 Except Code (287A) Through-Loading Feature
| Removing, installing | |||
|---|---|---|---|
| The spring in the inertia reel can pose an injury hazard when the tension is released and it uncoils. | Never disassemble inertia reels | AS91.00-Z-0002-01A | |
| 1 | Remove rear seat cushion | AR91.12-P-1020PC | |
| 2 | Remove rear seat backrest | AR91.12-P-1620PC | |
| 3 | Undo clips (1) | ||
| 4 | Remove felt cover (2) | ||
| 5 | Remove head rest guides (3) | AR91.16-P-1775P | |
| Figure | |||
| 6 | Loosen top half of the rear seat backrest cover | ||
| 7 | Detach upholstery wire (5) for rear seat backrest cover at eyelet (6) in the upholstery | ||
| 8 | Unscrew bolts (8). | Figure | |
| 9 | Unscrew screw (9) at inertia reel (7) | *BA91.40-P-1006-01A | |
| 10 | Remove automatic belt reel | ||
| 11 | Install in the reverse order |
| Number | Designation | Model 203 | |
|---|---|---|---|
| BA91.40-P-1006-01A | Bolt to rear inertia reel | Nm | 30 |