Removing and installing door catch - AR72.10-P-2100P

MODEL 203 

Illustrated on rear door of model 203.0 

Fig 1: Identifying Door Catch Remove/Install Components

	Removing, installing
1	Remove door liner from front door		AR72.10-P-1000P
2	Remove door liner from rear door	Model 203.0/203.2	AR72.12-P-1010P
3	Remove loudspeaker in front doors	With code (810) sound system	AR82.62-P-7845P
4	Remove loudspeaker in rear doors	Model 203.0 / 203.2 With code (810) sound system	AR82.62-P-7874P
5	Pull foil off of inner door panel in front area
6	Unscrew screws (1)	Screw on door catch on A-pillar	*BA72.10-P-1003-01A
		Screw on door catch	*BA72.12-P-1002-01A
		Torx bit set	Figure
7	Unscrew screw (2)	Screw on door catch on door	*BA72.10-P-1007-01A
		Screw on door catch	*BA72.12-P-1002-01A
		External torx set	Fig 3
8	Remove door catch (3) through assembly opening in inner door paneling
9	Install in the reverse order

FRONT DOOR

Number	Designation		Model 203
BA72.10-P-1003-01A	Screw on door catch on A-pillar	Nm	10
BA72.10-P-1007-01A	Screw on door catch on door	Nm	10

REAR DOOR

Number	Designation		Model 203
BA72.12-P-1002-01A	Screw on door catch	Nm	10

Fig 2: Identifying Torx Bit Set (000 589 01 10 00)

Fig 3: Identifying External Torx Set (001 589 76 09 00)