LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2002 >> C240 Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Doors & Windows -- 203 Chassis >> Testing & Repair >> Remove/install front door power window motor - AR72.29-P-1860P

Remove/install front door power window motor - AR72.29-P-1860P

MODEL 203.0/2 

Fig 1: Identifying Front Door Power Window Motor
G04737915
MODIFICATION NOTES

10.5.04 Battery will not be disconnected Step deleted  
10.5.04 It is only necessary to synchronize the new power window, complete basic programming will not be required Step 14  
REMOVINGINSTALLING Remove/Install     
1 Remove loudspeaker in front door   AR82.62-P-7845P
2 Remove cradle (1)    
3 Loosen bottom door foil (2), fold upward and fasten IMPORTANT Carefully remove door foil (2) and check carefully for damage, replace if necessary
IMPORTANTInstallation:  Check butyl cord on inner door panel, install new butyl cord if necessary.
 
    CAUTION Roller Figure
    Sealing cord *BR00.45-Z-1021-01A 
4 Drill out rivets (3)    
5 Loosen side door foil (2), fold to side and fasten IMPORTANT Carefully remove door foil (2) and check carefully for damage, replace if necessary
IMPORTANTInstallation:  Check butyl cord on inner door panel, install new butyl cord if necessary.
 
    CAUTION Roller Figure
    Sealing cord *BR00.45-Z-1021-01A 
6 Drill out rivets (4)    
7 Open side window half way*    
8 Unhook power window from inner door panel IMPORTANT The power window is hooked into a recess below the rivet (4)  
9 Push power window slightly toward rear    
10 Unscrew bolts (5). TORQUE SPECIFICATION Bolt, front door power window motor *BA72.29-P-1001-01A 
11 Remove left front power window motor (M10/3), right front power window motor (M10/4) from power window    
12 Install in the reverse order    
13 Read out fault memory    
REFER TO SELF-DIAGNOSTIC SYSTEMS Connect STAR DIAGNOSIS and read out fault memory   AD00.00-P-2000-04A
    Diagnosis system STAR DIAGNOSIS *WH58.30-Z-1048-13A 
14 Synchronize left front power window motor (M10/3), right front power window motor (M10/4) IMPORTANT To synchronize left front power window motor (M10/3), right front power window motor (M10/4): ↓  
    Perform basic programming AR00.19-P-0200P
15 Perform a function test    
TORQUE SPECIFICATION ELECTRIC SYSTEM - SIDE DOORS

Number Designation Model 203
BA72.29-P-1001-01A Bolt, front door power window motor Nm 4,8
Fig 2: Identifying Roller (168 589 05 63 00)
G04737916
COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1048-13A STAR DIAGNOSIS diagnosis system, Compact Passenger Car 6511 1801 00
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1021-01A Sealing cord A 001 987 73 46