Disassemble/assemble front bumper - AR88.20-P-2050P

MODEL 203 (except 203.076 /276) 

Fig 1: Identifying Front Bumper Disassemble/Assemble Components - Model 203 (Except 203.076 /276)

	Remove
1	Remove bumper protective strip (1)		AR88.80-P-2220P
2.1	Release connectors (PTS) and disconnect	Vehicles with code (220a) Parktronic system (PTS).
3	Remove front bumper		AR88.20-P-2000P
	Disassemble/assemble
4	Remove left/right fog lamp (E5/2, E5/1)	Installation:  Insert pilot strut into bumper.
5	Remove bumper inner section (2)
6	Remove impact absorber (3)
7.1	Remove Parktronic wiring harness (4)	Vehicles with code (220a) Parktronic system (PTS).
8	Remove license plate
9	Remove license plate molding (5)
10	Remove air grille (6)
	Install
11	Install front bumper		AR88.20-P-2000P
12.1	Connect connectors (PTS)	Vehicles with code (220a) Parktronic system (PTS).
13	Remove bumper protective strip (1)		AR88.80-P-2220P