Removing and installing wiper system - AR82.30-P-6400P

MODELS 203, 209 

Illustrated on Model 203.0 

Fig 1: Identifying Wiper System Remove/Install Components - Illustrated On Model 203.0

	Remove/Install
	Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
1	Remove water collector	Model 203	AR83.25-P-1402P
		Model 209	AR83.25-P-1402Q
2	Remove cover at front SAM control module with fuse and relay module (N10/1)
3	Disconnect coupling (1)
4	Expose cable (2)
5	Unscrew bolt (3)	Screw for wiper system on dividing wall	*BA82.30-P-1007-01A
6	Remove screws (4).	Screw for wiper system on body	*BA82.30-P-1006-01A
7	Remove wiper system
8.1	Remove bracket (5)	Model 203 Installation:  Ensure correct seating of bracket (5) to prevent damage by the wiper linkage.
9	Install in the reverse order

WINDSHIELD WIPER

Number	Designation		Model 203	Model 209
BA82.30-P-1006-01A	Nut/bolt, wiper system to body	NM	20	20
BA82.30-P-1007-01A	Bolt, wiper system to firewall	NM	8	8