Retrofitting Audio 30 APS navigation system - AN82.61-P-0001PA

MODEL 203.0 /2 /7 with CODE (750a) MB radio Audio 30 RDS with CODE (753) MB radio Audio 30 RDS with CODE (756a) MB radio Audio 10 RDS with CD compartment except CODE (352a) COMAND operating and display system 

Fig 1: Identifying Audio 30 APS Navigation System Components - Model 203.0 /2 /7 With Codes (750A), (753), (756A) And (352A

	Removing
	Notes on auto-pilot system		AH82.61-P-0001-01P
1	Connect quiescent current retention unit		*WH58.30-Z-1012-09A
	Risk of explosion  from gas. Risk of poisoning and caustic burns  from swallowing battery electrolyte. Risk of injury  from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead-acid batteries	No fire, sparks, naked flames or smoking. Wear acid-resistant gloves, clothing and glasses. Pour battery electrolyte only into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
2	Disconnect ground cable of battery
	Notes on battery	All models.	AR54.10-P-0003P
3	Remove radio	Part is no longer required.
			AR82.60-P-7502P
4	Remove instrument cluster
			AR54.30-P-6015P
	Installation
5	Retrofit antenna for global positioning system (GPS)		AN82.61-P-7474-04PA
6	Remove radio and navigation unit (A2/56)
7	Fit remaining parts to vehicle
8	Perform version coding subsequently	For vehicles with sound system, the sound system must be activated, if necessary, using Star Diagnosis.	AN82.61-P-0001-05P
9	Start up Auto-Pilot-System		AN82.61-P-1002-07PA