Removing and installing rear door control module - AR72.29-P-1100P

MODELS 203.0 /2 

Illustrated on model 203.0 

Fig 1: Identifying Rear Door Control Module

	Removing, installing
1	Remove door liner from rear door		AR72.12-P-1010P
2	Pull off door foil in assembly area
3	Disconnect door control module connectors	On left rear door control module (N69/3), right rear door control module (N69/4)
4	Press together clips (1) and take out door control module	Installation:  Observe retaining lug on left rear door control module (N69/3) and right rear door control module (N69/4).
5	Install in the reverse order