Retrofitting refrigerator in rear armrest - AN86.61-P-0001M
MODEL 220
The refrigerator is equipped with a low voltage cut-off switch allowing it to be operated when the vehicle is parked without discharging the battery.
When retrofitting it is necessary to install the 78-liter fuel tank with through-loading possibility instead of the standard fuel tank.
(Eliminated on vehicles with code 282 (ski bag in rear center armrest)).
| Fuel presents an explosion hazard and is toxic when inhaled or absorbed. Contact with fuel can cause skin and eye injury | Fire, open lights and smoking prohibited. Fill and store fuel only in containers intended for this purpose and marked accordingly. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| Notes on refrigerator in rear armrest | Model 220 | AH86.61-P-0001-01A | |
| Removal | |||
| 1 | Disconnect ground lead on battery | ||
| AR54.10-P-0003I | |||
| 2.1 | Completely remove rear seat | ||
| AR91.12-P-1620MA | |||
| 2.2 | Completely remove right rear bucket seat | ||
| AR91.12-P-1620M | |||
| 3.1 | Remove material cover (17) from rear armrest (18) | ||
| 3.2 | Remove center rear seat armrest | ||
| AR91.12-P-1620M | |||
| 4 | Remove control module mount below right rear seat | ||
| 5 | Remove insulating mat in rear | ||
| 6 | Remove ski bag (or refrigerator mount (12) | ||
| 7 | Remove trunk paneling | ||
| AR68.30-P-4600M | |||
| 8 | Remove fuel tank | ||
| AR47.10-P-4100IA | |||
| Installation | |||
| 9 | Install fuel tank | ||
| AR47.10-P-4100I | |||
| 10 | Reroute refrigerator wiring harness and connect | AZ86.61-P-0001-01M | |
| 11 | Retrofit refrigerator housing | Except on vehicles with code 282 Ski bag (through-loading possibility) |
AN91.22-P-0001-03M |
| 12 | Install trunk paneling | Ski bag (through-loading possibility) |
|
| AR68.30-P-4600M | |||
| 13 | Complete vehicle | ||
| 14.1 | Remove ski bag from rear armrest and lay in trunk (part remains with customer) | See Owner's Manual |
|
| 15 | Insert refrigerator (A39/1) into refrigerator housing (10) and connect connection lead to connector mount (6) | ||
| 16 | Fill fuel tank | ||
| AR47.10-P-4001B | |||
| Checking | |||
| 17 | Perform version coding for tank version | ||
| 18 | Check for proper function |
PARTS ORDERING NOTES
| Part no. | Designation | Quantity |
|---|---|---|
| KG47 | Fuel tank with through-loading possibility | 1 |
| KG54 | Refrigerator fuse | 1 |
| KG64 | Fuel tank assembly parts | as required |
| KG68 | Insulating mats for fuel tank | 3 |
| KG69 | Trunk paneling (with refrigerator) | 2 |
| KG82 | Refrigerator wiring harness | 1 |
| KG92 | Refrigerator with installation parts and center armrest on rear bucket seats | as required |