Removing and installing locking mechanism for folding rear backrest - AR91.12-P-1730GH

MODELS 163.136 /154 /172 up to 31.8.99 

Fig 1: Identifying Locking Mechanism For Folding Rear Components

	Removing, installing
1	Remove cover on rear-seat backrest	Carry out steps 1 to 12 in document Removing rear-seat backrest.	AR91.18-P-1870GH
2	Detach release pull (1) on rear backrest fitting (2)
3	Remove release pull (1) with release pull housing (3)
4	Remove bolt (4) on rear backrest fitting (2)		*BA91.12-P-1006-03A
			Figure
5	Remove rear backrest fitting (2)
6	Install in the reverse order

Rear seats

Number	Designation		Model 163 as of 09/99
BA91.12-P-1006-03A	Bolt, backrest fitting to seat frame	Nm	30

Fig 2: Identifying Torx Bit Set (000 589 01 10 00)