Remove/install traction systems control unit - AR54.21-P-0816GJ
MODEL 163.113 /128 /175 #A as of 371935, 163.157
| Remove/install | |||
|---|---|---|---|
| Risk of death. Death may result if vehicle slips or topples from the lifting platform. | Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| 1 | Place the vehicle on lifting platform | AR00.60-P-1000GH | |
| 2 | Remove fender liner in left fender | AR88.10-P-1300GH | |
| 3 | Unscrew bolts (1) | ||
| 4 | Detach ESP control unit (N47-5) from traction system hydraulic unit (A7/3) | ||
| 5 | Push catch upwards and detach plug from ESP control unit (N47-5) | ||
| 6 | Remove ESP control unit (N47-5) | ||
| 7 | Install in the reverse order |