Removing and installing front dome lamp - AR82.20-P-0110GH

MODEL 163 

Fig 1: Identifying Front Dome Lamp Components

	Removal, installation
1	Remove overhead control panel (1)		AR82.20-P-1100GH
2	Remove bulb (2)
3	Release socket (3) for bulb (2) by pressing in	The bulb socket is clipped to the overhead control panel.
4	Pull dome lamp switch (4) off of reflector housing (6)
5	Unscrew screws (5) from reflector housing (6) on left and right on overhead control panel (1)
6	Pry reflector housing (6) out of overhead control panel (1)	Avoid damaging reflector housing
7	Reinstall in opposite order