Replacing shock absorber mount on lower wishbone - AR32.25-P-0107D

MODEL 210.08/28 

Fig 1: Identifying Shock Absorber Pressing Out And Pressing In Position

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removal
1	Remove lower wishbone		AR33.20-P-0510D
2	Press out shock absorber mount (4s) using pressing-out tool (063a, 063b) on press	Center the sleeve (063b) and position drift punch (063a) with the collar at the top.	Fig 2
	Installation
3	Press in shock absorber mount as far as the stop using pressing-in tool (063a, 063b) on press	Position drift punch (063a) with the collar at the bottom.	Fig 2
4	Install lower wishbone		AR33.20-P-0510D

Fig 2: Identifying Pressing-Out And Pressing-In Tool (210 589 05 43 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.