Opening pop-up roof, function - GF77.20-P-2003A

MODELS 202 as of 1.6.97, 208, 210.081 /281 (except 208.4), 210 (except 210.081 /281) as of 1.3.97 

Function prerequisites 

• no overvoltage or undervoltage.

Function 

To open the tilting roof, press the tilting/sliding roof switch (N70s1) upward. The overhead control panel control module (N70)  inputs the state of the switch and actuates the

motor of the tilting/sliding roof (M12/1)  in the open tilting roof' direction for as long as the switch is actuated, but for a maximum of 25 sec. The "open tilting roof" function is aborted if the overhead control panel control module (N70)  detects lock-up  of the sliding/tilting roof motor (M12/1)  .

	Close tilting/sliding roof (SR), function		GF77.20-P-2002A
	Sliding/pop-up roof lock-up recognition, function		GF77.20-P-3000A
	Tilting/sliding roof (SR) position measurement, function		GF77.20-P-3001A
	Overhead control panel control module		GF82.20-P-4101A