Retrofitting CD changer - AZ82.64-P-0001I: Notes

MODEL 170 as of 1.7.98 except CODE (316) MB GSM cellular telephone (D2B) except CODE (317) GSM portable cellular telephone (D2B) except CODE (351) Auto Pilot System (APS) in combination with Audio 10 or Audio 30 radio 

Fig 1: Identifying Retrofitting CD Changer

	Notes on fiber optic	Models 129, 168, 170, 202, 208, 210, 220.	AH82.70-P-0001-02A
	Removal
1	Disconnect ground cable of battery
			AR54.10-P-0003A
2	Remove driver's seat
3	Remove radio
4	Lift floor covering on driver's side
			AR68.20-P-2050G
5	Remove front of center console
			AR68.20-P-2010G
6	Remove rear center console
			AR68.20-P-2020G
7	Remove paneling in trunk on left
	Remove/install side paneling in trunk		AR68.30-P-4800G
	Install
8	Retrofit D2B wiring harness for CD changer		AZ82.64-P-0001-01M
	Cover optical waveguide	Do not kink or stretch D2B fiber optic.	AR82.95-P-0005-01A
		Install covers on fiber optic coupling and equipment connector.
9	Retrofit CD changer in trunk		AZ82.64-P-0001-05F
10	Fit remaining parts to vehicle 7 -1
11	Perform startup and function check	Code CD changer to vehicle with HHT.	*WH58.30-Z-1036-13A
12	Enable radio code	Only when installing new radio