Battery discharges, vehicle can no longer be started - AF32.50-P-6400A

MODEL 215.### #A up to 004585, 220.### #A up to 110219 with CODE (487) Active body control (ABC) 

Damage code	Cause	Remedy
32 654 54	The ABC control unit remains active after locking the vehicle.	Quiescent current measurement immediately after locking the vehicle: ↓
	This can occur when the ABC control unit receives a pulse after a shut-off delay time of 60 s by locking the vehicle. I.e. the customer locks his vehicle only after 60 s or later.	1 Shut off vehicle, close doors and immediately lock with infrared remote control for central locking (RCL).
		2 Check quiescent current consumption. If quiescent current consumption is higher than approx. 50 mA, proceed as described in AR54.10-P-1030I	AR54.10-P-1030I
		If quiescent current consumption is less than approx. 50 mA.↓
		Quiescent current measurement approx. 120 s after locking: ↓ 3 Shut off vehicle, close doors and lock only after approx. 120 s with RCL.
		4 Test quiescent current.	AR54.10-P-1030I
		If quiescent current is approx. 350 mA: ↓
		5 Remove/install/replace ABC control unit. Before installing check whether status Q9 or higher is printed on the white rating plate.	AR32.22-P-6000I
		Calibrate plunger sensors according to menu point stored in DAS.
		6 Calibrate vehicle level.	AR40.20-P-0301I
		7 Test quiescent current.	AR54.10-P-1030I