Remove/install rear seat stowage box - AR91.12-P-1760N

MODEL 215.3 

Fig 1: Identifying Rear Seat Stowage Box Remove/Install Components - Model 215.3

Shown on model 220 

	Remove/install
1	Remove left and right rear seat cushion (2)		AR91.12-P-1020N
2	Release left and right front retaining clips (3) using assembly wedge and minimally lift the rear seat stowage box (1) at the front	Carefully release retaining clips (3), otherwise retaining clips (3) will be damaged.
			Figure
3	Insert suitable drift (left/right) through bore (4) of bracket (5) and release rear retaining clips (3)	Carefully release retaining clips (3), otherwise retaining clips (3) will be damaged.
4	Remove rear seat stowage box (1) from bracket (5)	Installation:  First position rear seat stowage box (1) on the rear seat backrest, then clip in.
5	Install in the reverse order

Fig 2: Identifying Wedge Tool (110 589 03 59 00)