LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2000 >> S430 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Air Intake, Turbo Charging - 215 & 220 Chassis >> Testing & Repair >> Remove/Install Low Temperature Water Circuit Radiator - Ar09.41-P-6935 >> Remove/Install Low Temperature Water Circuit Radiator - Ar09.41-P-6935Im

Remove/Install Low Temperature Water Circuit Radiator - Ar09.41-P-6935Im

Engine 275.980 In Models 215.379, 220.179 

Shown On Model 220 

Fig 1: Identifying Low Temperature Water Circuit Radiator Remove/Install Components - Shown On Model 220
G04840089
Modification Notes

1.12.05 Cooling system Engine 275.980 in model 215 *BF20.00-P-1001-02Q 
  Cooling system ENGINE 275.980 in MODEL 220 *BF20.00-P-1001-02Q 
REMOVINGINSTALLING Remove/install     
DANGER Risk of death  caused by vehicle slipping or toppling off the lifting platform. Align vehicle between the columns of the and position the four support plates below the lifting platform support points specified by the vehicle manufacturer. AS00.00-Z-0010-01A
DANGER Risk of injury  to skin and eyes caused by scalding from contact with hot coolant spray.
Risk of poisoning  from swallowing coolant.
Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.
AS20.00-Z-0001-01A
DANGER Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/ rear-end door or sliding roof. When moving components, ensure that no body parts or limbs are within the operating range of moving parts. AS00.00-Z-0011-01A
1 Remove radiator unit   AR20.20-P-3871IM
2 Unscrew bolts (3) from radiator for low-temperature water circuit (1) and steering oil cooler (2)    
3 Remove radiator for low-temperature water circuit (1) and steering oil cooler (2) from radiator (4)    
4 Remove nuts (5) for radiator for low-temperature water circuit (1) from steering oil cooler (2)    
5 Remove steering oil cooler (2)    
6 Install in the reverse order    
7 Pour in coolant FLUID SPECIFICATION *BF20.00-P-1001-02Q 
8 Bleed low temperature circuit   AR20.00-P-1145H
9 Inspect cooling system for leaks   AR20.00-P-1010HN
FLUID SPECIFICATION Cooling System

Number Designation Engine 275.980 in model 215 Engine 275.980 in model 220
BF20.00-P-1001-02Q Cooling system Total filling capacity Main circuit Liters ≈12.5 ≈12
Low temperature circuit Liters ≈2,1 ≈2.1
Filling capacity of anticorrosion and antifreeze down to -37°C Main circuit Liters ≈6.25 ≈6
Low temperature circuit Liters ≈1 ≈1
Specifications for Operating Fluids Sheet BB00.40-P-0310-01A BB00.40-P-0310-01A
Sheet BB00.40-P-0325-00A BB00.40-P-0325-00A