Remove/install glove compartment - AR68.10-P-1400GH

MODEL 163.136 /154 /172 #A up to 145272 

Fig 1: Identifying Glove Compartment Screws, Lamp, Stop Buffer & Striker Eye

	Remove/Install
1	Open glove compartment lid
2	Unclip glove compartment lamp (E13/1) and disconnect connector
3	Remove striker eye (1)	Installation:  Check adjustment. Refer to: ↓
		Adjust glove compartment lid.	AR68.10-P-1300GH
4	Unscrew screws (2-7)
5	Pry glove compartment (10) out of arrest at bottom and pull out
6	Install in the reverse order