Adjust glove compartment lid - AR68.10-P-1300GH

MODEL 163.136 /154 /172 #A up to 145272 

Fig 1: Identifying Glove Compartment Lid Adjustments

	Adjusting
	During entire operation pay attention to uniform transition, gap and adjustment possibilities on hinge (arrows) between glove compartment lid (1) and instrument panel (2).
1	Loosen screws (3) on striker eye (4)	Installation:  Adjust transition at top of striker eye (4). Glove compartment lid (1) should make slight contact to stop buffers.
2	Remove glove compartment		AR68.10-P-1400GH
3	Adjust gap	For this purpose loosen hinge screw (5) from hinge (6).
4	Install glove compartment		AR68.10-P-1400GH
5	Check for easy motion and proper function