Remove/install rear door lock - AR72.12-P-2510GH

MODELS 163.113 /136 /154 /157 /172 /174 

Fig 1: Identifying Rear Door Lock Components - MODELS 163.113 /136 /154 /157 /172 /174

	Remove/install
1	Remove door lining from rear door		AR72.12-P-1010GH
2	Remove exterior door handle on rear door	Remove bearing bracket through access cover in inner door panel.	AR72.12-P-2410GH
3	Close crank window
4	Undo plug-in connector (4)
5	Unscrew screws (1) at door lock (2)	Hold door lock to prevent it from falling down into the door.
			*BA72.12-P-1001-01C
		Torx bit set	Fig 2
6	Remove door lock (2) through the bottom access cover (3)	Pull window guide rail gently forward, so that the door lock can be guided behind it. Installation:  position window guide rail correctly.
7	Install in the reverse order

Rear door

Number	Designation		Model Series 163
BA72.12-P-1001-01C	Bolt at door lock	Nm	8

Fig 2: Identifying Torx Bit Set (000 589 01 10 00)