Removing and installing fixed window in rear door - AR72.12-P-1970GH

MODEL 163 

Fig 1: Identifying Fixed Window Components In Rear Door

	Removal, installation
1	Remove crank window in rear door		AR72.12-P-1910GH
2	Remove window guide rail (1)	The window guide rail is permanently connected to the rubber frame
3	Remove window stay (2) from window
4	Remove fixed window (3) together with rubber frame (4) using installation wedge	Installation:  Coat rubber frame (4) with solution of soap and water Observe cutout (5) in window frame in door
			Figure
5	Install in opposite order

Fig 2: Identifying Installation Wedge (115 589 03 59 00)