Check vehicle level at front and rear axle with electronic inclinometer, adjust if necessary - AR40.20-P-0301C
MODEL 210.00 /01 /02 /03 /04 /05 /06 /07 /20 /21 /22 /23 /24 /26 /27
Fig 1: Identifying Inclination Meter, Measurement Sensor And Measuring Plate - Model 210.00 /01 /02 /03 /04 /05 /06 /07 /20 /21 /22 /23 /24 /26 /27
Fig 2: Checking Vehicle Level At Front And Rear Axle With Electronic Inclinometer - Model 210.00 /01 /02 /03 /04 /05 /06 /07 /20 /21 /22 /23 /24 /26 /27
Modification notes
| 15.9.99 | Value changed from -0.9 to -0.8° | Value in row BE40.20-P-1002-03D changed for model 210.004/035/037 with AMG sports suspension | *BE40.20-P-1002-03D |
| 15.9.99 | Value changed from 2.6 to 1.9° | Value in BE40.20-P-1002-02D changed for model 210 with AMG sports suspension | *BE40.20-P-1002-02D |
| Checking | |||
| On vehicles with level control a vehicle level too low should not be corrected by changing the level control connection rod (control point). |
|
||
| 1 | Observe general information on chassis alignment. | AR40.20-P-0201A | |
| 2 | Install measuring plate (086b) in the recess in the lower wishbone. |
|
*WE58.40-Z-1002-15A |
| 3 | Check vehicle level at the front axle via the wishbone inclination. | Attach measurement sensor (086a) (connecting cable pointing to center of vehicle) and store each measured value.
|
*WE58.40-Z-1002-15A |
| *BE40.20-P-1002-02D | |||
| 4 | Check vehicle level at the rear axle via the rear axle shaft inclination. | Attach measurement sensor (086a) to left and right rear axle shaft (connecting cable pointing to center of vehicle) and store each measured value.
|
*WE58.40-Z-1002-15A |
| *BE40.20-P-1002-03D | |||
| Vehicle level at front or rear axle outside tolerance:↓. | |||
| Adjust vehicle level by changing the springs or spring rubber mounts. | AR40.20-P-0300-01B |
Vehicle level - front axle
| Number | Designation | Model 210 Classic/Elegance | Model 210 Avantgarde with sports suspension | Model 210 Suspension for increased ground clearance | |
|---|---|---|---|---|---|
| BE40.20-P-1002-02D | Vehicle level - front axle | ∠ ° | +6.0 (-2.1/+1.4) | +2.1 (-2.1/+1.4) | +8.2 (-2.1/+1.4) |
Vehicle level - front axle
| Number | Designation | Model 210 with AMG sports suspension | Model 210.055/072 with Code 957a E36, E50 AMG | Model 210.074/274 E55 AMG | |
|---|---|---|---|---|---|
| BE40.20-P-1002-02D | Vehicle level - front axle | ∠ ° | +1.9 (-1.5/+0.7) | +2.6 (-1.5/+0.7) | +2.2 (-1.5/+0.7) |
Vehicle level - rear axle
| Number | Designation | Model 210 suspension for increased ground clearance | Model 210.00/01/02/03/04/05/06/07 Classic/Elegance without level control | Model 210.00/01/02/03/04/05/06/07 Classic/Elegance with level control | |
|---|---|---|---|---|---|
| BE40.20-P-1002-03D | Vehicle level - rear axle | ∠ ° | +3.5 (±1.0) | +1.2 (±1.0) | +0.3 (±1.0) |
Vehicle level - rear axle
| Number | Designation | Model 210.00/01/02/03/04/05/06/07 Avantgarde/sports suspension without level control | Model 210.00/01/02/03/04/05/06/07 Avantgarde/sports suspension with level control | Models 210.004/035/037 with AMG sports suspension | |
|---|---|---|---|---|---|
| BE40.20-P-1002-03D | Vehicle level - rear axle | ∠ ° | -0.8 (° 1.0) | -1.3 (° 1.0) | -0.8 (-1.0/+0.6) |
Vehicle level - rear axle
| Number | Designation | Model 210.006/007/016/017/020/025/026/053/055/061/063/065/070/072 with AMG sport suspension | Model 210.055/072 with Code 957a E36, E50 AMG | Model 210.20/21/22/23/26/27 Avantgarde/sports suspension | |
|---|---|---|---|---|---|
| BE40.20-P-1002-03D | Vehicle level - rear axle | ∠ ° | -0.6 (-1.0/+0.6) | -0.3 (-1.0/+0.6) | -0.6 (±1.0) |
Vehicle level - rear axle
| Number | Designation | Model 210.20/21/22/23/26/27 Classic/Elegance | Model 210.074/274 E55 AMG | |
|---|---|---|---|---|
| BE40.20-P-1002-03D | Vehicle level - rear axle | ∠ ° | +1.9 (± 1.0) | -0.8 (-1.0/+0.6) |
Workshop equipment
| WE58.40-Z-1002-15A | Electronic clinometer |