Check, adjust gap between strut and wheel-housing - AR32.30-P-0610-01A
Rear strut test specifications
| Number | Designation | Model Series 202 with ride-height control | Model Series 203.2 with self-leveling suspension | |||
|---|---|---|---|---|---|---|
| BE32.30-P-1001-01A | Distance between supply hose bracket on strut and wheel-housing | with suspension extended | left | mm | 11-15 | 11-15 |
| right | mm | 24-28 | 24-28 | |||
| Fig. see | AR32.30-P-0610-01A | AR32.30-P-0610-01A | ||||
| BE32.30-P-1002-01A | Distance between supply hose bracket on strut and wheel-housing | ready to roll (standing on wheels) | left | mm | 14-18 | 14-18 |
| right | mm | 26-30 | 26-30 | |||
| Fig. see | AR32.30-P-0610-01A | AR32.30-P-0610-01A | ||||
Rear strut test specifications
| Number | Designation | Model 210.0 with level control system / ADS | Model Series 208 with self-leveling suspension | |||
|---|---|---|---|---|---|---|
| BE32.30-P-1001-01A | Distance between supply hose bracket on strut and wheel-housing | with suspension extended | left | mm | 8.5-10.5 | 11-15 |
| right | mm | 8.5-10.5 | 24-28 | |||
| Fig. see | AR32.30-P-0610-01A | AR32.30-P-0610-01A | ||||
| BE32.30-P-1002-01A | Distance between supply hose bracket on strut and wheel-housing | ready to roll (standing on wheels) | left | mm | 10.5-12.5 | 14-18 |
| right | mm | 10.5-12.5 | 26-30 | |||
| Fig. see | AR32.30-P-0610-01A | AR32.30-P-0610-01A | ||||
When installing the strut (5), check the distance "a" between the supply hose bracket on the strut tube (arrow) and the wheel-housing (70c).
Positioning the spring strut
Always ensure that the supply hose is unscrewed and loose before proceeding to align the strut.
Ensure that the boot on the strut is not twisted when installed.
Model Series 202, 203, 208
Model 210.0