Remove/install rear side window - AR67.30-P-4000KA

MODEL 208.435 /444 /445 /447 /448 /465 /470

Fig 1: Identifying Rear Side Window Remove/Install Components

G04729420

	Remove/Install
	Risk of injury due to hands being crushed when window glass is not secure	Secure windows against falling down.	AS67.00-Z-0002-01A
1	Remove rear passenger compartment side trim panel		AR68.30-P-4780KA
2	Remove inner and outer sealing rail (1)	Open soft top compartment cover
3	Remove rear shaft strut (2)
4	Remove bolts (4).	Move rear side window (3) up until screws (4) are accessible
5	Remove rear side window (3) upward
6	Install in the reverse order	Installation: Adjust rear side window	*BE60.00-P-1009-01A
			Figure

TEST AND ADJUSTMENT VALUES, GAP DIMENSIONS AT HOODS, DOORS AND COVERS

Number	Designation				Model 208.4
BE60.00-P-1009-01A	Gap dimension	Front door window to soft top	Dimension "Z"	mm	9.0 (± 1.0)
		Front door window to rear side window	Dimension "N"	mm	8.0 (± 2.0)
		Front door window to rear side window	Fig. see		AR60.00-P-0700-01KA

Fig 2: Identifying Feeler Gage (129 589 03 21 00)

G04729421