Removing and installing soft top lock unit - AR77.33-P-1006KA

MODEL 208.435 /444 /445 /447 /448 /465 /470 

Fig 1: Identifying Soft Top Lock Unit Remove/Install Components

	Removing, installing
1	Open soft top	Leave soft top compartment cover up
2	Remove paneling from soft top at front		AR68.30-P-4320KA
3	Remove rubber weather strip (1)
4	Loosen glued joint between lock unit and soft top insulation	Installation:  Replace glued joint if required	*BR00.45-Z-1003-02A
5	Unscrew mounting screws (2)		*BA77.33-P-1001-01C
		Installation:  Use screw securing agent	*BR00.45-Z-1008-02A
6	Unscrew left and right mounting nuts (3) and remove tensioning cords
7	Remove lock (4) unit
8	Install in the reverse order

SOFT TOP - MECHANICAL SYSTEM

Number	Designation		Model 208.4
BA77.33-P-1001-01C	Screw for lock unit on roof tip	Nm	8

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1008-02A	Quick glue	A 002 989 93 71
BR00.45-Z-1003-02A	Universal adhesive	A 000 989 82 71