Removing and installing headliner of soft top - AR68.30-P-1770KA

MODEL 208.435 /444 /445 /447 /448 /465 /470 

Fig 1: Identifying Headliner Of Soft Top Remove/Install Components (1 Of 2)

Fig 2: Identifying Headliner Of Soft Top Remove/Install Components (2 Of 2)

	Removal, installation
	Remove paneling from front of soft top		AR68.30-P-4320KA
1	Unscrew screw (1) from front of soft top frame
2	Remove headliner mount from front soft top frame (2) from soft top lock assembly plate (3)
3	Pull headliner mount on main roof bow (4) from roof bows (5) downward
4	Remove transfer belts (6) from soft top bow (7)	Loosen soft top cover at side on main pillar and soft top bow and lay down at top
5	Drill rivet off of mounting lug (8) on corner roof bow (9)
6	Remove plastic clips (10) from headliner sliding element (11)	Installation:  Replace plastic clips
7	Unscrew rear screws (12) from corner roof bow tensioning cords (13) on soft top bow (7)
8	Remove rear mount (15) at side of soft top bow (7)
9	Unclip cove (15) from rear window frame (16)
10	Pull corner roof bow weather strip (17) out of corner roof bow (9) at side	Pull corner roof bow weather strip out of roof bow together with paneling
11	Remove soft top headliner
12	Install in the reverse order