Removing and installing wiper motor - AR82.30-P-6800E: Notes

MODELS 202, 208, 210 

Fig 1: Identifying Wiper Motor Remove/Install Components

	Remove
	Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism	Always remove ignition key when working on windshield wiper mechanism.	AS82.30-Z-0001-01A
1	Withdraw ignition key
2	Remove wiper arm		AR82.30-P-6100E
3	Open engine hood and move to upright position	Model 202	AR88.40-P-1000E
		Model 208	AR88.40-P-1000F
		Model 210	AR88.40-P-1000F
4	Remove air inlet	Model 202, 208	AR83.25-P-1401E
		Model 210 left	AR83.25-P-1403F
		Model 210 right	AR83.25-P-1404F
5	Remove wiper system	Model 202, 208	AR82.30-P-6400E
		Model 210	AR82.30-P-6400F
6	Basic setting of wiper gear head		AR82.30-P-6800-02E
7	Unscrew nut (1) from wiper motor shaft
8	Press crank arm (3) off of wiper motor shaft
9	Unscrew bolts (2) on wiper motor
10	Take off wiper motor
	Install
11	Move wiper motor to parking position		AR82.30-P-6800-01E
12	Install wiper motor
13	Screw in bolts (2) on wiper motor		*BA82.30-P-1001-01A
14	Basic setting of wiper gear head		AR82.30-P-6800-02E
15	Align crank arm (3) and press onto wiper motor shaft	Pay attention to setting: Crank arm (3) and wiper linkage (4) are fitted onto wiper motor shaft in extended position.
16	Screw nut (1) onto wiper motor shaft		*BA82.30-P-1002-01A
17	Install wiper system	Model 202, 208	AR82.30-P-6400E
		Model 210	AR82.30-P-6400F
18	Install wiper arm		AR82.30-P-6100E
19	Install air inlet	Model 202, 208	AR83.25-P-1401E
		Model 210 left	AR83.25-P-1403F
		Model 210 right	AR83.25-P-1404F
20	Close engine hood	Model 202	AR88.40-P-1000E
		Model 208	AR88.40-P-1000F
		Model 210	AR88.40-P-1000F

Windshield wiper

Number	Designation		Model 202	Model 208	Model 210
BA82.30-P-1001-01A	Bolt to wiper motor fixing.	Nm	5	5	9
BA82.30-P-1002-01A	Nut on wiper motor shaft	Nm	19	19	19