Removing and installing emergency call system control module - AR82.95-P-0008D
MODEL 208.4 with CODE (348a) Emergency call system with CODE (498) Japanese version
Illustrated with permanently installed telephone code 316
Fig 1: Identifying Emergency Call System Control Module Remove/Install Components - Illustrated With Permanently Installed Telephone Code 316
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | *WH58.30-Z-1012-09A | |
| 2 | Disconnect ground lead from battery | AR54.10-P-0003A | |
| 3 | Remove rear installation wall | AR68.74-P-1000KA | |
| 4 | Disconnect connection lead and D2B antenna lead from emergency call control module (A35/8) | AR82.95-P-0005-01A | |
| 5 | Unscrew emergency call control module (A35/8) from mount with 4 nuts (1) and pull out | ||
| 6 | Install in opposite order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |