Removing and installing rear mounting wall - AR68.74-P-1000KA

MODEL 208.435 /444 /445 /447 /448 /465 /470 

Fig 1: Identifying Rear Mounting Wall Remove/Install Components

	Removing, installing
1	Open soft top compartment cover
2	Remove retractable trunk partition		AR68.50-P-3000KA
3	Remove trunk paneling in area of rear mounting wall
4	Unscrew screws from rear mounting wall (2)	Installation:  Before tightening position all screws
			*BA68.74-P-1001-01A
5	Remove rear mounting wall (1) upward through soft top compartment	Avoid damaging paint
6	Install in the reverse order

DIVIDING WALL

Number	Designation		Model 208.4
BA68.74-P-1001-01A	Screw for rear mounting wall on body	Nm	9