Removing and installing rear window noise suppression capacitor - AR82.62-P-7385D

MODEL 208.3 

Fig 1: Identifying Rear Window Noise Suppression Capacitor Remove/Install Components

	Removal, installation
1	Remove paneling on C-pillar	Left C-pillar	AR68.30-P-4490K
2	Disconnect electrical connectors (1, 2)	The electrolytic capacitor (C3) is located in the cutout below the rear shelf, route wire for electrical connector (2) up to capacitor
3	Disconnect lead from ground (rear window defroster) (W13)
4	Reinstall in opposite order