Replacing front mount of lower wishbone - AR33.20-P-0526B

MODEL 170, 202 

Fig 1: Removing Front Mount Of Lower Wishbone Components - Model 170, 202 (1 Of 2)

Fig 2: Removing Front Mount Of Lower Wishbone Components - Model 170, 202 (2 Of 2)

Fig 3: Identifying Front Mount Of Lower Wishbone Rubber Mount, Spacer Sleeve And Trust Piece - Model 170, 202

	Removal
1	Remove lower wishbone		AR33.20-P-0510B
2	Clamp wishbone in vise	Use aluminum jaws
3	Loosen sleeve in rubber mount with a suitable drift punch
4	Detach outer steel casing of rubber mount with a flat chisel	Do not damage mounting eye of wishbone
5	Clean mounting bores for mount in wishbone	Smear rubber mount with a thin film of lubricant Do not use any oil or grease containing acid.	*BR00.45-Z-1010-06A
	Installation
6	Insert rubber mount (16a) and spacer sleeve (16b) and pull in up to the stop.		Fig 4
	Use sleeves (012a)	The flats (arrows) must be horizontal to the installed position of the wishbone. ↓
7	Install lower wishbone		AR33.20-P-0510B

Fig 4: Identifying Removal And Installation Tool (202 589 01 43 00)

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1010-06A	Anti-friction agent	A 000 989 03 67