Removing and installing tilting bracket on tilting/sliding roof - AR77.20-P-1700E

MODEL 202 with CODE (412b) Electrically operated tilting/sliding roof with CODE (414a) Electrically operated glass tilting/sliding roof 

Fig 1: Identifying Tilting Bracket On Tilting/Sliding Roof Remove/Install Components (1 Of 2)

Fig 2: Identifying Tilting Bracket On Tilting/Sliding Roof Remove/Install Components (2 Of 2)

	Removal
1	Remove cover on tilting/sliding roof		AR77.20-P-0500E
2	Remove tilting/sliding roof panel		AR77.20-P-1000E
3	Remove interior rear view mirror
4	Actuate tilting/sliding roof switch in closing direction	until sliding roof drive switches off
5	Remove front dome lamp		AR82.20-P-0110E
6	Detach sliding roof drive (3) from tilting/sliding roof frame		AR77.20-P-1700-01E
7	Remove water drain through (4)
8	Unscrew screw (5) and remove sliding rail (6)	Tilting bracket (10) can be moved
9	Remove tilting bracket (10)		AR77.20-P-1700-02E
	Installation
10	Install tilting bracket (10)		AR77.20-P-1700-03E
11	Fasten sliding roof drive (3)
12	Install front dome lamp		AR82.20-P-0110E
13	Install interior rear view mirror
14	Install tilting/sliding roof panel		AR77.20-P-0500E
15	Adjust tilting/sliding roof panel		AR77.20-P-1100E
16	Install cover on tilting/sliding roof panel		AR77.20-P-0500E
17	Check tilting/sliding roof for proper function