Removing and installing tilting/sliding roof panel - AR77.20-P-1000E

MODEL 202 with CODE (412b) Electrically operated tilting/sliding roof with CODE (414a) Electrically operated glass tilting/sliding roof

Fig 1: Identifying Tilting/Sliding Roof Panel Remove/Install Components (1 Of 2)

Fig 2: Identifying Tilting/Sliding Roof Panel Remove/Install Components (2 Of 2)

	Removal, installation
1	Remove interior mirror
2	Remove cover on tilting/sliding roof		AR77.20-P-0500E
3	Remove tilting/sliding roof panel	Electrically operated steel tilting/sliding roof (code 412b)	AR77.20-P-1000-01EA
		Electrically operated glass tilting/sliding roof (code 414a)	AR77.20-P-1000-01EB
	Install tilting/sliding roof panel	Electrically operated steel tilting/sliding roof (code 412b)	AR77.20-P-1000-02EA
		Electrically operated glass tilting/sliding roof (code 414a)	AR77.20-P-1000-02EB
4	Reinstall in opposite order

TEST AND ADJUSTMENT VALUES FOR TILTING/SLIDING ROOF PANEL

Number	Designation			Model 202
BE77.20-P-1001-01A	Joint gap	Front of tilting/sliding roof panel	mm	0,15
BE77.20-P-1001-01A	Joint gap	Side and rear of tilting/sliding roof panel	mm	0,30

Special tools

Fig 3: Identifying Adjustment Gauge - 2 Each (140 589 04 21 00)

Fig 4: Identifying Installation Pliers (124 589 00 37 00)

Fig 5: Identifying Installation Pliers (140 589 00 37 00)