Convenience opening of power windows function - GF72.29-P-3004A

MODELS 202 as of 1.6.97, 208, 210.081 /281 (except 208.4), 210 (except 210.081 /281) as of 1.3.97 

Function prerequisites 

• No overvoltage/undervoltage
• circuit 15 off and
• circuit 15R off and
• circuit 15c off.

Function 

Each door control module (N69/1)  or (N69/2), (MODELS 202/210 also N69/3 or N69/4)  receives over CAN the request for convenience opening and then actuates the power window motor  . The motor is actuated until the door control module detects through position recognition  that the window is completely open. The convenience opening function of the power window is also performed for non-normalized windows.

The convenience opening function of the power windows is aborted if

• the request over CAN is no longer received or
• lock-up of the power window is detected or
• the function requirements listed above are no longer satisfied.

	Position recognition for power windows		GF72.29-P-4000A
	Lock up recognition for power windows		GF72.29-P-4001A
	Synchronization of power windows		GF72.29-P-4003A
	Convenience closing of the power windows		GF72.29-P-3005A